A left turn across oncoming traffic can hold up an entire approach. A protected phase gives those turning drivers a clear crossing while the opposing movement waits. Design the lane and the signal together so the green leads somewhere useful.

Connect the left-turn approach to its exit

Give left-turn traffic a dedicated approach lane where there is room and link it to the intended exit. Check the movement from the incoming lane through the junction. The official Trafficity game description confirms support for protected left turns, adjustable phases, and lane connections.

Give the turn its own protected phase

Set a phase that lets the left-turn approach go while oncoming traffic that crosses its path stays stopped. Give the opposing through movement another window. Keep the first setup simple so you can see whether each movement clears the junction before the next one starts.

Check the queue and the receiving lane

Watch a few cycles and see where the left-turn queue ends. If waiting cars spill into the through approach, give the turn more room where the road allows it. If cars get green but cannot enter their exit, check the lane connection and the space in the receiving road.

Frequently asked questions

What makes a left-turn phase protected?

The left turn can cross while the opposing traffic that would intersect its path waits.

Why use a dedicated turn lane?

It gives waiting turn traffic a place to queue and makes it easier to control that turn as a separate signal movement.

Should I give every left turn its own phase?

Begin with the turn that repeatedly conflicts with oncoming traffic. Check the other movements after the change, since an extra phase changes when they can go.